Planes and some more planes
    Long break between posts....Even longer between painting. With the wife being down for servicing (read surgery) have not had much time to do much painting. Our group (well the three of us) have decided to do a Battle of Britain campainge using Bag the hun rules and Finest hour rules from Too Fat Lardies. Being overly ambitious gamers, like most of us are. We are going to start at the begining of the battle and fight every day through to the end with our squadrons...Insane I hear you all say. Not really. The idea is that we will play each day as a mission for each of our squadrons and just keep track of results, this way we have a fall back game when Flames of War gets too much. Obviously this may take some time to finish but the beauty is that others can drop in or out as we go along.

    As a celebration of this new venture we went and splurged on some new figures....as you do. Went with the Tumbling dice 1/600 range. Nice amount of detail for such a small figure. Small storage requirments (easy to hide from wife) and reasonably quick to paint. And not to mention, cheap :). We rolled up the missions for our first sorties so we could get a start on the painting with the priority on what we needed first. Lucky for me my first mission is bouncing some bombers escorted by some me110's. Easy meat for my Spitfires. So I got stuck in and got some painting done before the wife went into hospital and everything ground to a halt. here's some pics of the handywork so far.....

Spitfires with a trial wash.

ME110's with a wash and decals. 

Does that plane have teeth ? Surely not...

Yep, they certainly do...kind of.

The Flight Stand Conundrum.....

    After patiently making a hex board....by hand. It is time to look at the flight stands. We have decided to have variable height stands. I admit to being a pain about this as I hate playing flight games that use altitude, only to have your beautifully (ok in my case suitably) painted aircraft stalked across the sky by what could easily be mistaken as a Borg invasion fleet ! The old tracking of altitude by dice. I feel it clutters up your game space and detracts from the look of the miniatures on the table. After all they are the reason we play with figures, is it not. Otherwise you might as well just play the board game version of your choice.
    Another reason that I like variable height stands is that at a glance you can see the relative altitudes of everyone....making that all important decision to split s down onto the tail of that recon plane or immellmen up and back to face that vic of incoming spitfires a little easier. At least for me anyway. You dont need to poke your nose around checking every ones dice/ markers to see their altitude, its right there in plane (excuse the pun) sight..

    Now the initial plan was to use some 5mm acrylic rod, cut into 1.5cm lengths. Then drill the centres and glue in some smaller diameter brass rod into the top of each length. So we should get each section that plugs into the next, giving you a variable altitude stand. On the top piece you stick a small tack and glue a small rare earth magnet to the bottom of your plane. This allows you to use different planes with the stands so you don't need one for every plane in your collection....and takes away the dreaded wrong polarity between different planes that I must admit to being prone to do, even with the turrets of my FOW tanks !!! :(  This was the plan anyway. When the acrylic rod showed up in the post, it was exactly that....one rod. Not the ten that were ordered. Then trying to cut the bloody stuff so that it is a parallel cut and doesn't melt or take forever to do....

    So a little frustrated and brooding in my shed.....as you do. I had a spark of an idea. As I had two different sizes of brass rod, I figured I could knock up something to at least satisfy my need to have made some progress.

The ingredients...sometimes simple is the best.

    All I used was two different size brass tubes, one just small enough to fit snug in the other. A base of some kind, in my case some round acrylic pieces I had laying around. And something metal for on top so the magnet holds to it, I used an upholstery tack. First thing was to cut the tube to length. Easier to cut them with one inside the other, then at least they are the same length. Pop the small one out and then score the side of it to mark the desired altitudes and glues the tack on top. Then I drilled a hole in the base and put the larger brass tube in it. With a pair of pliers, gently crimp the top of the base tube. This will make it a tight fit when you insert the smaller tube and hold it a the height you desire. Then slide your small tube in and plonk a plane on top...Ta Da ! A variable height altitude stand...

The finished product.

A demonstration of formation flying.....I know they're not painted. New scale, give me time !

Break right !

    All in all I'm pretty chuffed with how these came out...Not bad for about half hours work. On the down side I don't think I could paint them to tone down the brass. Any paint would rub of the inside one with the movement but can live with that for now I think.
    And to make them look better here is some painted planes on them....

Beware the hun in the sun !